|
11-176001-000
1117600100
11176001600
Stop the pit board from walking.
|
|
|
|
|
|
|
12300071000 Manufactured in the USA to out perform the OEM design two piece split pulley. Don’t buy any other based one price, if you want a pulley that stands up to the demand that this one requires you need the EBN heavy duty pit belt drive pulley.
|
12300073000
12-3089
123089
|
12300075000 Manufactured in the USA from premium cold rolled steel and designed as a one piece pulley with a replaceable bearing. Special attention is paid to the outer bearing race dimensions to guarantee that our pulley will not fail.
|
|
|
12300082003
27-8625
278625
|
|
Machined in the USA from solid steel bar stock with a special feature. An extended mounting boss is precision welded to the pulley, the extended mounting boss will eliminate the chance of pit shaft damage caused by a loose wobbly pulley.
|
|
|
12300103000
12-3103
123103 The back is latex coated to prevent glue saturation. Endless loop design will prevent material pull out and is cut over sized for easy installation.
|
12300103000CM Manufactured in the USA using a custom 3-ply industrial belting material. The material is oil resistant and wears like iron. Industrial Velcro is sewn with a heavy nylon thread to three edges for easy installation.
|
12300103000ZIP Manufactured using our existing heavy duty pit rug with an added feature.
|
|
|
12300109000
12-3019
123019
|
|
|
|
12300131000
12-3031
123031
|
12300141000
12-3141
123141 Machined in the USA from stress proof steel for long life. Special attention is paid to the bearing journals to guarantee a perfect fit eliminating wear between the bearing race and the shaft.
|
12300146002
12-3462
123462
|
12300146004
12-3464
123464
|
12300149000
12-3149
123149
|
12300160000
12-300164-000
12300164000
12-3060
123060
|
12300162000
12-3162
123162
|
12300163000 Manufactured in the USA using heavier gauge steel then any of our competitors. Bearing sleeves are precision welded square to the arm guaranteeing a perfect alignment and even stress load on the bearing.
|
12300164000
12-300160-000
12300160000
12-3060
123060
|
12300168000
12-3068
123068 Manufactured in the USA from a heavy gauge sheet steel. The bend is formed to grab the pit board and hold it tight! Special attention is paid to the pin assembly when welded to prevent the chance of failure.
|
12300169000
12-3069
123069 Manufactured in the USA from a heavy gauge sheet steel. The bend is formed to grab the pit board and hold it tight! Special attention is paid to the pin assembly when welded to prevent the chance of failure.
|
12300170000
12-3070
123070
|
12300172000
12-3072
123072
|
12300178000
12-3078
123078
|
12300180000
12-3180
123180
|
12300192000
12-3192
123192 Manufactured in the USA from heavy gauge sheet steel. Heavy duty design will prevent them from bending and distortion. Far superior to our competitors.
|
12300193000
12-3193
123193 Manufactured in the USA from heavy gauge sheet steel. Heavy duty design will prevent them from bending and distortion. Far superior to our competitors.
|
12300194000
12-3094 Manufactured in the USA using heavier gauge steel then any of our competitors. Bearing sleeves are precision welded square to the arm guaranteeing a perfect alignment and even stress load on the bearing. Bearings are factory pressed
|
|
|
|
|
12300207000
12-3207
123207
|
12300208000
12-3208
123208
|
|
|
12-300088-000
12300088000
12300244000
12-3088
123088
|
|
|
|
|
One piece fiberglass pit board that doesn't require rubber shims or blocks. All of the spacing is built right into the board. This is a forever board.
12860620002
12-860620-005
12860620005
12-860620-004
12860620004
12-860620-003
12860620003
|
12860620004
12-3261
123261
|
12860620005
12-3260
123260
|
|
12860659000 Manufactured in the USA incorporating a rectangle boxed frame for superior strength. Round stock is made from thick wall tubing. Diagonal braces are properly positioned for extra strength and support.
|
12860725000C
12-8663
12-8663 Milled, cut and sewn in the USA from a heavy duty cotton material that cleans the pins and bowling balls far superior then any other machine washable carpet cover on the market. Bleached off white for easy maintenance inspe
|
12860725000S
SNS 868918-SCC
SNS868918SCC
12-8663
128663
|
|
|
90300076000 Cast poured in the USA using a special tear resistant urethane. Unique mold design allows for smooth fast pin transfer and a quiet running pit yet tough enough to keep the upper pit frame from sagging and causing ball return issues.
|
90300077000 Cast poured in the USA using a special tear resistant urethane. Unique mold design allows for smooth fast pin transfer and a quiet running pit yet tough enough to keep the upper pit frame from sagging and causing ball return issues.
|
90675000000
11-6750
116750 Package of 3. Manufactured in the USA from a tear and oil resistant nytrile rubber. Special mounting flange will keep our OEM design mount from failing prematurely and is a Veteran mechanics favorite.
|
|